Nickpurser
Just got it firing!
Hi, I have a 1993 Nevada that was stored in a barn for 8 years. I have cleaned the carbs (Ultrasound) and fitted all new O-rings and float needles, adjusted float heights. Checked Valve clearances, Air filter removed, checked and cleaned, new exhaust and inlet gaskets. Emptied petrol tank, cleaned taps and filters and fitted new pipes plus checked petrol cap breather. New plugs.
It idles and revs fine in the garage but, on the road it surges frequently above 4,000 revs and feels quite lumpy.
I bought a carb synchro tool, which was perfect at idle but, as soon as I increased the revs, the right column went up but the left column went down! I borrowed my mate's Carbtune and the same happened with that. Has anyone had the same problem or any idea what might be causing this anomaly.
I have not checked Compression.
It idles and revs fine in the garage but, on the road it surges frequently above 4,000 revs and feels quite lumpy.
I bought a carb synchro tool, which was perfect at idle but, as soon as I increased the revs, the right column went up but the left column went down! I borrowed my mate's Carbtune and the same happened with that. Has anyone had the same problem or any idea what might be causing this anomaly.
I have not checked Compression.