Fiat500
Cruisin' Guzzisti
The side stand on my 12S has been tight lately to flip up without a little help from my foot so I took the sump cowl off to lube the pivot shoulder bolt and noticed it was halfway out.
Anyway after replacing it making sure it was tight I also checked the parts manual and noticed it should also have a lock nut on the back.
Worth checking. Nut is M10 x 1.25 Pitch.
Anyway after replacing it making sure it was tight I also checked the parts manual and noticed it should also have a lock nut on the back.
Worth checking. Nut is M10 x 1.25 Pitch.