Ryuujin101
Just got it firing!
- Joined
- Apr 4, 2012
- Messages
- 3
I've had my 2007 motto guzzi breva 750 for a few months now and it just hit the 10,000 mi. mark, but i'm having some issues with it. when i go to start it from cold using the cold start lever, i have to put it all the way down before it even senses that it is being activated. is there a way to adjust this or should i have it replaced/repaired professionally?
on another note i have an issue where i'll be riding and hold the clutch and as the rpm's drop it goes so low as to stall the bike, from high speed or low speed stops even if im just sitting at a stop light. i saw other forum post and it didn't really help to answer my question.
finally i am looking for a guide to use to repair the bike, mainly adjusting the clutch lever cable, it doesn't seem like it is fully engaging the clutch when pulled down, i can still hear a noise while in gear and its worse when i downshift to first from third for example.
on another note i have an issue where i'll be riding and hold the clutch and as the rpm's drop it goes so low as to stall the bike, from high speed or low speed stops even if im just sitting at a stop light. i saw other forum post and it didn't really help to answer my question.
finally i am looking for a guide to use to repair the bike, mainly adjusting the clutch lever cable, it doesn't seem like it is fully engaging the clutch when pulled down, i can still hear a noise while in gear and its worse when i downshift to first from third for example.