Louisv97
Cruisin' Guzzisti
Hey everyone, I decided to remove my final drive to grease the splines and realized that I did not pay attention to the coupler that joins the Final drive to the drive shaft?
I happened to have removed the spacer that is inside which holds the spring in place
Anybody know if it matters which side goes on which.
Both sides seem to be of equal length.
Any input would be much appreciated
I happened to have removed the spacer that is inside which holds the spring in place
Anybody know if it matters which side goes on which.
Both sides seem to be of equal length.
Any input would be much appreciated