• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

ECU 00 error unknown driving me crazy

D

Denzis

Just got it firing!
Joined
Aug 3, 2017
Messages
7
Location
Alkmaar
Good morning all. I own a Moto Guzzi Griso 2009 1200

I recently had the service error from the oil pressure sensor. I have since replaced it, so that report disappeared. However now and then I get a SERVICE message with the corresponding ECU ERROR 00. The comings and goings are completely random. I have no idea where it came from, I did this before the notification came.
New oil filter (drain plug not replaced) New Reaction rod Entire motorcycle has been repainted from white to black and reassembled New oil pressure sensor New fuel line from the tank to the T-piece New windshield (probably not relevant) Gas pump has been off and reassembled for a while, looked good and does not leak. Oil cooler has been repaired (had a hole in it) and mounted again Rear turn signals (halogen no LED) Mileage is around 25k The engine runs perfectly and everything works. Anyone have any idea what it could be? The Guzzi is also equipped with non-original (but working) grip heating.

Thanks a lot in advance. I am getting quite desperate.
 
00 is an unknown error. Even the maker of the ECU doesn't know. My suggestion is to disconnect the battery for a couple hours. It may clear the issue, it may not.
 
Unfortunately it did not... Im now checking wires and contacts and still waiting for the guzzidiag cable... No succes yet. Seems like im the only in the world with this problem..
 
Denzis said:
Unfortunately it did not... Im now checking wires and contacts and still waiting for the guzzidiag cable... No succes yet. Seems like im the only in the world with this problem..
Click to expand...

Just to let you know guzzidiag is not supported on this site.
 
You must log in or register to reply here.
Back
Top