• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

En Guarde Loopers

Tonerjockey

Tonerjockey

High Miler
GT Contributor
Joined
Oct 28, 2008
Messages
788
Location
San Jose
Ever get one of these?

GuardBroken.jpg


New ones are not available from "the factory." Copies go for the astounding price of $150 (US) per .... phew that's some Ferrari payments right there.

It took me about a year (part time of course) to find the material, build the 3 jigs needed, and figure out how to make these. Great fun for the whole family.

guardsnew.jpg


Gotta drill two drain holes and then chome time. Close enough for me.

I can post pics of the jigs if anyone is interested.

Alex
 
One of the early questions I had wuz how did they make those ends like that?

GuardEnd.jpg


Here's the jig I made. This is used in a press to make the flat ends with the rounded shapes

GuardPress.jpg


Nest question was regarding the mutiple radius bends.

This jig makes dual radius bends. The big one makes the large radius first. The the piece is flipped and the small radius is made.

GuardJigs.jpg


I'll make up a step by step photo review and post it next week. It's been busy in the shop lately as we are setting up for prepping the lakester AND making room for a build of the 76 Lemans for LSR next year.

More soon,

Alex
 
You must log in or register to reply here.
Back
Top