I thought about that but I had 2 doubts. One was using the smaller 6mm bolt with the 10mm hole in the mount. The other was that the top surface of the retainer is slightly lower than the top surface of the clamp. Did you use a spacer or just rotate it and keep the entire mount on the cable clamp.
I already had the tank off so the cable wasn't a problem but they do tuck that thing in there quite tight.
Apologies. For a guy who takes pix of virtually everything, don't have any of this.
Yes, tho, re spacer and, as I recall, extra washer or two at top and bottom. Lifts it all just enough.
Bill