atiliocorneli
Just got it firing!
Hello all, I have my new 2006 Griso V1100 since last september and I noticed that suspension settings are on the hard side. I revised this forum and found very useful tips to adjust settings and I did partially, because I have a couple of doubts I would like to solve here.
This settings are in a topic posted and threaded in 2008:
Front
compression: 1/4 T (stock: 1 T)
rebound: 2 1/4 T (stock: 1.5 T)
preload: 5th mark (stock: 4th)
sag: 37mm (stock: 35mm)
Rear
compression: 1/4 T (stock: 1.5 T)
rebound: 40 clicks (stock: 17)
sag: 25mm
Can anybody clear up for me what "sag" means and how and where is it measured? I revised my owners manual and workshop manuals and did not find a clue.
This settings are in a topic posted and threaded in 2008:
Front
compression: 1/4 T (stock: 1 T)
rebound: 2 1/4 T (stock: 1.5 T)
preload: 5th mark (stock: 4th)
sag: 37mm (stock: 35mm)
Rear
compression: 1/4 T (stock: 1.5 T)
rebound: 40 clicks (stock: 17)
sag: 25mm
Can anybody clear up for me what "sag" means and how and where is it measured? I revised my owners manual and workshop manuals and did not find a clue.