NOTICE: The owner of this website and GTMotoCycles.com completely lost his home on the morning of January 8th in the L.A. Wildfire Storm. Most of his neighborhood is gone, and a few friends were killed along with their pets. The GTM SHOP and STORE are functioning normally, but we DEMAND EXTREME PATIENCE on orders as we are a SMALL business and Todd usually has his hands on nearly every order before it goes out. You can find more info on a post named L.A. Wildfires in the USA section. Our heart and best go out to everyone effected in this horrific disaster.
Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
How much would it be to sort the fueling? Is this done via a Power Comander or is it possible to just get the stock ECU re-flashed with a modified map?
Todd I haven't done my PCV /AT install yet, plan to next week. Since I got the CNC ring after you sent the PCV will the base map you installed in the PCV be OK or do I need a different base map ? BTW the ring is a beautiful piece of craftsmanship and the air sensor plugged right in.
Question the bike is in undress mode Tank off, upper fairings off, air box off. What is the best way to tackle the ECU removal ?
Is this a Griso? If so, ECU is behind the front forks. There is a plastic cover held on by two bolts and the ECU has two bolts and a ground strap connected to it. The harness has some clamps that rotate 90 degrees in order to disconnect them from the ECU.
Do you have an updated PCV map for the Norge with CNC open air box and aftermarket pipe ? If you do I would like to get it in before I crank er up for the first time and eliminate most of the Auto Tune trim updates, caused by the open air box.
Just received the air box ring and filter today. Looks great and really cleans things up. Looks like rain tomorrow, test ride is going to have to wait.
These are now back in stock, but I have a limited few. Contact me direct to order, pricing is listed in the above thread. Direct e-mail Todd at GuzziTech.com
Just received the air box ring and filter today. Looks great and really cleans things up. Looks like rain tomorrow, test ride is going to have to wait.