Guz5
Tuned and Synch'ed
I noticed in 07 the modified head bolt torques for the 2valve norges and brevas. The upper and lower BOLTS are now 15Nm then 90 degrees. NOT 15nM AND 90 + 90
The HEAD nuts are 15 Nm then 90+ 90 degrees.
The manual still available from here tells the story that my manual I coppied from a factory disc in 07 tells, which hasnt been updated yet.
Also there is not four O rings under the rocker pin holder bracket as there was for ever on the four studs as the manual suggests.. Now its only two in a different position.
Just thought yopu may need to know.
Cheers
The HEAD nuts are 15 Nm then 90+ 90 degrees.
The manual still available from here tells the story that my manual I coppied from a factory disc in 07 tells, which hasnt been updated yet.
Also there is not four O rings under the rocker pin holder bracket as there was for ever on the four studs as the manual suggests.. Now its only two in a different position.
Just thought yopu may need to know.
Cheers