boatdetective
Tuned and Synch'ed
Hey there- I just got my FAC dampers and Wirth progressives!!! fitted everything up and... the springs don't fit in the fork tubes!? I miked everything up and found that the springs have a nominal OD of 1.025", while the tube ID is almost exactly the same as the springs or slightly under (yes folks- this is a case where good ole SAE is much more convenient to measure). The original springs were .90" - or approx. .5-.7mm slop. it seems the good people at Wirth measured the spring to the tube- with no clearance.
Anyone have a suggestion for an alternate progressive spring that does not cost $200 a set?? (Oh yeah- and that will fit)
Anyone have a suggestion for an alternate progressive spring that does not cost $200 a set?? (Oh yeah- and that will fit)