• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

K&N oil filter

PICKLEKOOKEN

PICKLEKOOKEN

Just got it firing!
Joined
Nov 2, 2008
Messages
11
Has anybody used a K&N oil filter on the NORGY? If Im right it should be HP 1003, I crossed it over from Marks list, I want the nut on the bottom of the filter My last 14 flute filter didt work with my 14 flute wrench. And that DRIPS! Mike :angry:
 
K&N doesn't recommend a filter for Guzzi. Since they don't recommend a filter for Guzzis, they say don't use a K&N on one. You may want to try the Bosch 3330. Torque the filter to 15Nm.
 
My list says to use a HP 1002. You may want to use a cross reference chart to double check.

I've used the Bosch 3330 but lately have used the 3400. It has a little more capacity yet does not extend past the bottom of the pan. Easier to get to and get off also.
 
I believe the Norge uses the same filter as the other big Guzzi's. That would mean that a K & N HP1002 would be a cross reference to the WIX filter that I usually run.
I am not surprised that K & N does not put the effort into testing to confirm that their filter works on a Guzzi. There is no money there.
 
I use the K&N HP1002. It is the cross-reference for the filter designed to fit the Toyota 4.7 ltr V8. The Toyota V8 filter is the one that MG has been reported as installing on current 1200s.
 
PICKLEKOOKEN said:
My last 14 flute filter didt work with my 14 flute wrench. And that DRIPS! Mike :angry:
Click to expand...

Mike,

My last filter didn't work with the wrench either?! And it drips! I'm using the wrench from MG Cycle and UFI filters, and it always worked before. It sort fo fits, but when you try to torque it it slips and will only go so tight. Did they change the filters I wonder?
 
You must log in or register to reply here.
Back
Top