• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

LED Option for California???

R

Robsnsx

Just got it firing!
Joined
Aug 27, 2021
Messages
6
Location
Medina, OH
I’m wondering if anyone has successfully switched the stock lamps on the headlight and driving lights (bar lights) with LED bulbs? I have a 2017 California 1400. If so what exact models fit and is it difficult to do? Thanks for any assistance.
 
I've fitted a Jeep LED headlight to a GRiSO. It was rather tricky to mount, in the end I ditched the existing headlight shell, and mounted it directly. This is different to merely swapping the existing incandescent bulb for a LED one, apparently the LED bulbs do not work successfully in the stock headlight reflector, because the source of light is much larger.

There's plenty of information on the web, but I think you'll be disappointed with the LED bulb with the existing reflector.
 
Todd can get you some good quality LEDs for your driving lights. This is not a one for one swap. I've come up with a plan to place the drivers under the tank so the lamps will fit into the housing and have adequate room to cool. This will involve modifying the original wiring to the driving lights. While I have a solid plan, I haven't had a chance to get to the project due to work demands. When I do, I'll try to remember to take some photos and write up some notes. I've only found one direct replacement, but it's a passing beam.
 
Last edited:
scrublink said:
Todd can get you some good quality LEDs for your driving lights. This is not a one for one swap. I've come up with a plan to place the drivers under the tank so the lamps will fit into the housing and have adequate room to cool. This will involve modifying the original wiring to the driving lights. While I have a solid plan, I haven't had a chance to get to the project due to work demands. When I do, I'll try to remember to take some photos and write up some notes. I've only found one direct replacement, but it's a passing beam.
Click to expand...
Xenon kit 35 Watts solve the problem 👍🙂
 

Attachments

  • IMG_20210522_190225.jpg
    IMG_20210522_190225.jpg
    79.9 KB · Views: 12
I actually just went through this exact dilemma after not being able to fit H4 LEDs, I ended up going the 7" Jeep/Harley LED light route. I just posted the thread and has all the details on how I went about it, and what light I used. I have the Audace though, not sure if the headlight unit is the same or not as the california.
 
It is not the same. I would actually like to know if those two headlights - Cali/Eldo vs Audace - are interchangeable. Anyone swapped Audace headlight on Cali/Eldo?
 
You must log in or register to reply here.
Back
Top