Hello, I have a LM III that I thought was leaking oil from the base or head gasket or possibly from the O rings but I think I found the problem today. The leak seems to be coming from the distributor. There is a small hole in the body of the distributor at the base of the bell part, [maybe a breather hole?] and I am getting a steady drip coming out of this hole. Is there a gasket or O-ring that could allow this leak or would it be due to excess crankcase preasure? I wasn't able to get to far into it tonight but I thought I might get a headstart if I ask here for some ideas. Like an idiot I only checked the usual culprits like the oil line,valve cover gasket ect.. before tearing it down and replacing the gaskets and O rings. Oh well, good to freshen those up to. Thanks in advance for any advice.