leafman60
Cruisin' Guzzisti
I've been at work lately finishing out the Stelvio. Just for ideas, here are a few things I've done recently:
Finally fabricated my GPS mount to locate the unit in a sturdy, relatively dry and relatively high position. Added a radar detector mount tight below the GPS. Added a tire pressure monitor on the radar mount. A challenge is to position these items in such a way so as not to block visibilty of the dash warning and indicator lights.
Wired-up and added a handlebar-mounted (red knob) control for my heated gear stub-outs below the seat.
Replaced the stock fog lamps with some 3.5 inch halogen running lamps. Amazing increase in illumination for the ditch areas.
Fabricated-up an enlarged foot print and J-B Welded it to the sidestand (you dont need to bolt it). Be sure to allow a couple of days to cure.
I also installed the Euro turn signals and the non-lighted mirrors. It's a much better set-up.
The only things I have left to install are my rope, shovel and axe.
Finally fabricated my GPS mount to locate the unit in a sturdy, relatively dry and relatively high position. Added a radar detector mount tight below the GPS. Added a tire pressure monitor on the radar mount. A challenge is to position these items in such a way so as not to block visibilty of the dash warning and indicator lights.
Wired-up and added a handlebar-mounted (red knob) control for my heated gear stub-outs below the seat.
Replaced the stock fog lamps with some 3.5 inch halogen running lamps. Amazing increase in illumination for the ditch areas.
Fabricated-up an enlarged foot print and J-B Welded it to the sidestand (you dont need to bolt it). Be sure to allow a couple of days to cure.
I also installed the Euro turn signals and the non-lighted mirrors. It's a much better set-up.
The only things I have left to install are my rope, shovel and axe.