• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Recall Question?

GUZIRDR

GUZIRDR

Cruisin' Guzzisti
Joined
Feb 25, 2009
Messages
100
Location
Los Angeles, California
I just picked up my Stelvio from it's first service and it had the warranty recall work done. Riding it back home it seemd like the bike sounded different (Deeper and not as clean) and mostly I found it to have lost some torque in 1st and 2nd gear. Has anyone else experience a similar thing?
 
The only bits that have *changed* are the tappets themselves. The cams are identical in terms of part #'s so one assumes there is no profile change, (Certainly my *new* and *old* cams looked identical to the nekid eye). I would think that if one of the cn sprockets had slipped a tooth you'd get bent valves on that cylinder and unless there is a requirement to remove and fiddle with a whole lot more stuff on the Stelvio than there is on the Griso I can't see why anything else would of changed???

It might be worth whipping the rocker covers off for a looksee and to double check the valve clearances, (And possibly make sure the pushrods are in the right way up.) bit other than this I can't see anything that would of made any difference. Certainly my bike didn't change apprecieably when i swapped the cams.

Pete
 
I didn't notice any difference when mine was done, but I did adjust the tappets after 150 miles, I also did the string mod around the plug cap , making them easier to remove next time, can't remember who posted that tip:unsure: , but many thanks for a brilliant idea, all the best G
 
Picke mine up last Sat. afternoon and have put about 350 km. on it since. I notice no difference in power or torque. It runs a whole lot better low down though. (Throttle position sensor had to be re-set) FBC
 
Got mine back last week and was ok when I drove it home. However, took it out for a blast last night and it has certainly lost some power and also 'pings' when I pull it under power.

Its going back again to be sorted.
 
You must log in or register to reply here.
Back
Top