ChuckH
Tuned and Synch'ed
OK, I'm getting close to finishing the installation of a Rostra Electronic Cruise Control on my 2012 NTX. This unit was on my Wee-Strom and I am now moving it over to the new bike. The installation has not been difficult but the installation options are very limited. The Guzzi engineers did a good job of packaging this bike so there are not many extra nooks and crannies to put the hardware for the cruise.
The problem -- I don't know how to show pictures along with some text on this website. I would appreciate it if someone can explain how I can do that, in really basic details. I will have pictures in a Folder in the Picture File in my C-Drive.
There are going to be four pictures at most -- 1) showing the location of the Servo under the rear section of the seat, actually about the only location available, 2) showing the connection of the cable from the Servo to the bottom of the left hand throttle body, 3) showing the location of the Control Module (the thing with the buttons) on the Beauty Ring at the rear of the fuel tank, and 4) showing the Speed Pickup location on the Left Side of the Front Wheel Assembly. Pictures 2 and 3 may be combined since they are in the same basic location. The balance of the installation information is connection of the various wires and I should be able to explain that in words as necessary.
Thank you.
The problem -- I don't know how to show pictures along with some text on this website. I would appreciate it if someone can explain how I can do that, in really basic details. I will have pictures in a Folder in the Picture File in my C-Drive.
There are going to be four pictures at most -- 1) showing the location of the Servo under the rear section of the seat, actually about the only location available, 2) showing the connection of the cable from the Servo to the bottom of the left hand throttle body, 3) showing the location of the Control Module (the thing with the buttons) on the Beauty Ring at the rear of the fuel tank, and 4) showing the Speed Pickup location on the Left Side of the Front Wheel Assembly. Pictures 2 and 3 may be combined since they are in the same basic location. The balance of the installation information is connection of the various wires and I should be able to explain that in words as necessary.
Thank you.