• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

Spada rear caliper alignment

G

g5er

Just got it firing!
Joined
Mar 1, 2013
Messages
13
Location
Maldon, Essex
Hi. I'm getting close to completeing my rebuild of an '81 Spada as a G5.
The rear caliper is completely rebuilt, seals, pads, pistons etc. But on bolting it on, though it slides over the disc easily, as the bolts holding it to the caliper mount are tightened, the disc binds.
It dosn't lock up, but becomes stiff to turn. I have done a visual check on the caliper alignment, as one would when shimming a front disc, but it looks right to me.
I am tempted to try running it and see if it will settle in. But I am worried about how hot it will get in the process. Any thoughts?
My guess is that the caliper mount may be slightly bent.
I have checked to see that the new pistons are properly seated, but as I said, Until the bolts are tightend to their last half a turn, its free enough.
Cheers, Pete.
 
If you have the pads fully retracted this is not good. Place a shim between the caliper and mount to prevent the binding. You said half a turn, so I'm guessing maybe a 0.25 to 0.50 inch shims might be enough.

If the pads are not fully retracted, the pads will center to the rotor on their own and not be a problem.
 
Thanks John. I've fiddled with it a bit more and took the two 0.5mm shims from one front caliper and tried those in it. Problem solved. :D
 
g5er said:
Thanks John. I've fiddled with it a bit more and took the two 0.5mm shims from one front caliper and tried those in it. Problem solved. :D
Click to expand...

Now the question is, Is the front caliper OK, or do you need more shims for the front?
 
Certainly do. Unfortunately its the Stafford Classic Bike Show this weekend and my usual supplier is there rather than on the end of the phone at his business. It'll have to wait til Monday.
 
I certainly will. Unfortunately its the Stafford Classic Bike Show this weekend so my usual supplier is there rather than at his place of business. So it'll have to wait til Monday.
 
You must log in or register to reply here.
Back
Top