Penis Rotor
GT Godfather!
These are known to be a right bastard to get off without damaging the caps. Mario in Perth has also had experience of them simply failing in service as the spark arced through the insulation.
It seems that you can snip the caps off and then use NGK plug caps with the part # of SB05E (Maybe with the suffix of 89054, I scribbled that on a bit of paper and don't know if it is relevant but better you have it. I've forgotten the details.) These apparently have an angled top but WILL fit under the plug lead covers and cost a LOT less than a new set of leads, although everyone will be getting a set of *New* leads with the cams and tappets apparently.
OK. Back to other stuff.
see ya.
Pete
It seems that you can snip the caps off and then use NGK plug caps with the part # of SB05E (Maybe with the suffix of 89054, I scribbled that on a bit of paper and don't know if it is relevant but better you have it. I've forgotten the details.) These apparently have an angled top but WILL fit under the plug lead covers and cost a LOT less than a new set of leads, although everyone will be getting a set of *New* leads with the cams and tappets apparently.
OK. Back to other stuff.
see ya.
Pete