• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

The ideal winter gloves?

GrahamNZ

High Miler
Joined
Feb 17, 2009
Messages
618
Location
Wellington New Zealand
Heated grips of various kinds have added weight to my bikes for many years, but I'm still searching for the ideal winter gloves to go with them. Heavily insulated gloves help keep in any meagre heat your hands manage to generate, but they also tend to exclude the heat generated by the heated grips. What seems like not much heat through heavy gloves can almost burn bare hands. The gloves I'd like to find would have little insulation in the underside areas so you could feel the grip heat, and a lot of insulation on the outer areas where wind-chill is the problem. Gloves like that would also allow good feel of the controls.

Anyway, does anyone know of gloves with different degrees of insulation?
 
I have struggled with finding a glove that is windproof, insulated, yet thin enough to transfer heat from heated grips to my hands. The intermediate solution I have found is the Shift Racing Torrent gloves. They are good for about an hour in 30 degree weather with heated grips on high. Here is a link to the gloves: http://shop.shiftracing.com:80/ecomm/Pr ... 00001F.jpg
 
I have been using a pair of Held gloves for quite a few years now. I think the model is the Steve gloves.

They match almost exactly what you are asking for, in that the palms are single-thickness kangaroo, and the backs have the insulation. They have metal rivets on the heel of the palms that are backed up with extra layers on the inside, so that when you are sliding down the road on them, they don't burn your hands. Thankfully, I have not had the opportunity to test this feature as yet.

They are a little princely at about $160, but they wear like iron and feel really great.

Naturally, YMMV and all of that.

-Jack
 
Graham,

There is a technical problem using heated grips and goretex and equal lined gloves.
Since the membrane technique is based on the idea that the inside of the glove must be warmer than the outside, for the humidity to be able to pass the membrane the right way inside out, exactly the opposite thing will happen if you turn on the grip heating.

Maybe Gerbings will be a better choice than heated grips?

I've just purchased a pair of Held "Warm'n Dry" ( http://www.newenough.com/gloves/insulat ... loves.html ) gloves, but cannot give you any opinions yet, as it's summer now up here.
They are rated to be good, though.
 
We have been using the BMW Pro Winter II gloves since last winter - only complaint is that they are not water prooof as they claim - after about 5 hours in puring rain they become like washing up gloves with holes in the fingers..

They do however have thin palms which make the Breva heated grips on the high setting actually too hot.
 
Simple.... in my book any thing less than 15 degrees is a problem, and many years ago when I moved SOUTH to Brisbane I swore that it was as far as I would ever go.... but in the ensuing years I realise I got it wrong.

To quote Susan Johnson of HUBB fame from the recently released Achievable Dream video "It is always Summer somewhere in the world, and it is quite easy to plan your motorcycle journey to take advantage of that" so winter gloves or no, that's all the encouragement I need. Sorry Graham but I won't be visiting in the winter..... and the endless summer - here I come!












(well one day)
 
Mike

It's 15 C here at the moment, which is pretty mild for this time of year. Sorry to hear that your BMW gloves leak. Do you have a jacket where the sleeves fit over the glove tops?
 
The way the gloves are designed the jacket goes inside, but that was not where they leaked from. 5 hours in the pelting rain was just too much for them and it breached the waterproof (?) liner.

Thing is though that they are very nice winter gloves from a warmth perspective and we now just use a good Kiwi product (rain off over gloves) over the top on a long ride in the rain which to be honest isn't that often so in the end we are very happy with them - heated grips work very well with them n chilly mornings!
 
That's exactly what the rain off over gloves are.

Link HERE


glove_lg.jpg
 
Back
Top