Ridemalibu Motorcycle Rentals & Tours – Los Angeles CA
  1. Ciao Guest - You’ve landed at the ultimate Guzzi site. In SoCal? See the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have are already answered on the Forum with FACTS, NOT OPINIONS. PLEASE DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back if you are posting elsewhere on the web. Note there's decades of Guzzi hands-on experienced help on this site, all whom give endless amounts of their time for free; BE COURTEOUS AND RESPECTFUL! There is zero tolerance on personal attacks and off-site links to other Forums or competing products. Also be sure to click on the STORE link also above for our 600+ product inventory, including many of our 100% Made-in-house-USA GTM products and engine kits. We appreciate the consideration, understanding and your business... past and future. And if you haven't seen our MotoCycle (not) art, click on the BUILDS tab above to see our work at our sister business; GT MotoCycles®-- WE ARE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED.

v11 sport front u joint & trans fill

Discussion in 'Spine' started by Dolittle, Aug 14, 2013.

  1. Dolittle

    Dolittle Just got it firing!

    Joined:
    Jun 4, 2013
    Messages:
    19
    Likes Received:
    0
    Location:
    Washington
    Hi Again

    Bike running good, but lubed rear u joint and slip but how do you get to the front one?? And how high in the window should the trans lube be. Had a small drip and it looked to be way over full so sucked out about small amount so it just filled the glass.
    Thank You. Dolittle. :D
     
  2. GTM®

    GTM® Administrator Staff Member GT di Razza Pura

    Joined:
    Jul 1, 2009
    Messages:
    11,481
    Likes Received:
    3,559
    Location:
    Malibu
    You can either try to align the guard holes with your gun tube, or you have to remove it. I just add the correct amount per spec. I'd say towards the top of the window to the middle. Over that, and it's over-full.
     

Share This Page