colebrooker
Just got it firing!
- Joined
- Sep 1, 2011
- Messages
- 1
I have been using this bike for 7 years and it has recently started dropping oil onto the disc brake and wheel rim/tyre.
The air vent was clear, the box split and the crown wheel assembly taken to a main dealer for the oil seals to be replaced. Refilled to the level of the horizontal plug with 85/140 oil supplied by dealer. It was ok after a 40mile gentle ride with pillion pasenger but next ride up to about 60mph it was just as bad as before. Oil over disc and wheel. I now have it apart again and can see nothing wrong. I have never put the moly additive in. Any suggestions please. I am going away for a couple of weeks so may not respond for a while. Thanks
The air vent was clear, the box split and the crown wheel assembly taken to a main dealer for the oil seals to be replaced. Refilled to the level of the horizontal plug with 85/140 oil supplied by dealer. It was ok after a 40mile gentle ride with pillion pasenger but next ride up to about 60mph it was just as bad as before. Oil over disc and wheel. I now have it apart again and can see nothing wrong. I have never put the moly additive in. Any suggestions please. I am going away for a couple of weeks so may not respond for a while. Thanks