• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

V50 Ignition Coils.

Tassie Mike

Tassie Mike

Tuned and Synch'ed
Joined
Sep 8, 2010
Messages
49
Location
Taswegia, the best riding country in the world.
Hi All.

I'm in the process of renovating the Gosling and feel the need to replace the coils (cos Dave Richardson says they're crap). I have a Dyna S ignition and the Silent Hecktik bits to replace the regulator and rectum fryer.
What I need is specific advice on replacement coils.
Any and all would be gratefully received.
 
Sounds like a waste of money to me. They have obviously done the job for the last 30 years so what's the issue? :roll:

If they measure to spec and produce a good spark then what more do you want? :?

Check the ignition circuit is providing a good 12V to them and the earths are good but beyond that waste your money if you feel the need.

Just my opinion.
 
What's really the problem with your ignition coils? If you want to replace the coils the I suggest that you get some good coil packs.
 
I went w/ Dave Richardson's suggestion in Guzziology for Flame Throwers. Cheaper and better than Dyna per Guzziology. But then, as intimated here, who knows what's up w/ a coil 'til it fails - when they do poop out you'll wish for the best, I guess. :?:
 
You must log in or register to reply here.
Back
Top