I have had my exhaust mods and upmap installed since last June. The bike ran beautifully, until Christmas when it developed a cold starting issue... It took between 3-6 attempts of the starter to get the bike running which each attempt it run for a little longer until it warmed up a little.. But once the bike was running it ran superbly..
Then last night I changed all the oils and while taking it ona short slow ride 40mph to warm it up and check for leaks it started flashing a warning on the dash and restricted power.. Files attached. My local dealer has closed. My nearest dealer is 200 miles away in Scotland. I'm in Northern Ireland. So I'd need to get a boat.. This isn't really feasible. Anybody got any ideas of what I should be looking at or for?
Upmap was able to pull these Codes.
Then last night I changed all the oils and while taking it ona short slow ride 40mph to warm it up and check for leaks it started flashing a warning on the dash and restricted power.. Files attached. My local dealer has closed. My nearest dealer is 200 miles away in Scotland. I'm in Northern Ireland. So I'd need to get a boat.. This isn't really feasible. Anybody got any ideas of what I should be looking at or for?
Upmap was able to pull these Codes.