Quattroa4m
Tuned and Synch'ed
Obviously, I've had a little too much time on my hands lately.
My 1400 came with auxiliary lighting, but I've not been real keen on the chrome "bullet" housing and the 35w halogens. I did a little digging and found that the HD auxiliary light housings (black) were a near perfect fit on the MG light bar. The rest was pretty much plug and play (if you don't mind a little soldering and shrink tubing work).
I've not got the lights dialed in quite yet. However, from my perspective, they seem to be quite an improvement, so far. Idling voltage is 13.9~14.0, up from 13.4~13.5 with the 35w halogens.
The Vision X LEDs run about 6000K while the factory LED running lights and H3 low beam run about 3200K. So there is a bit of color mismatch.
My 1400 came with auxiliary lighting, but I've not been real keen on the chrome "bullet" housing and the 35w halogens. I did a little digging and found that the HD auxiliary light housings (black) were a near perfect fit on the MG light bar. The rest was pretty much plug and play (if you don't mind a little soldering and shrink tubing work).
I've not got the lights dialed in quite yet. However, from my perspective, they seem to be quite an improvement, so far. Idling voltage is 13.9~14.0, up from 13.4~13.5 with the 35w halogens.
The Vision X LEDs run about 6000K while the factory LED running lights and H3 low beam run about 3200K. So there is a bit of color mismatch.
Last edited: