redrockmania
Just got it firing!
I am preparing to replace camshaft belts and replace the timing gears and oil pump on my 1997 Daytona RS. The nut holding the lower front belt pulley on is Part #: 92602316 and is described as having a M6 x 1.5 thread. This seems wrong. The washer behind the nut is Part #: 95004217 and is size 17 x 27 x 2. Because the inside diameter of the washer is 17mm, it seems probable that the nut (92602316) has a thread that is M16 x 1.5. The nut part number ends in 16 which further tends to confirm this. Is anyone able to advise if the nut has a M16 x 1.5 thread and that the M6 x 1.5 specification is wrong. Thanks.