ohiorider
Cruisin' Guzzisti
Since the CARC bikes permit us to access the ECU and Dashboard error codes under the Diagnostics section of the Menu, here's my question. Is there any documentation on how to use these for troubleshooting? In other words, if I open Diagnostics, and, for example, find that Throttle Value (ECU10) has an 'x' after it, how do I interpret that? Does it mean that the ECU is not receiving ANY signal from (probably) the TPS, or does it mean that the value is simply out of an acceptable range. Same for Engine Temperature. Is an 'x' telling me it is out of range, or that there is no signal from a temperature sensor? Same for Ignition Coils 1 and 2, injectors 1 and 2, and others.
More useful would be ...... if there Is any documentation available that says " .... when you see error code ECU15 (for example), this error could be caused by (a), (b), (c), or (d).
to determine if (a) do this
to determine if (b) do this
to determine if (c) do this
to determine if (d) do this
Or is this level of detail available only through Moto Guzzi technician training?
More useful would be ...... if there Is any documentation available that says " .... when you see error code ECU15 (for example), this error could be caused by (a), (b), (c), or (d).
to determine if (a) do this
to determine if (b) do this
to determine if (c) do this
to determine if (d) do this
Or is this level of detail available only through Moto Guzzi technician training?