I just picked this bike up after it sat for 2-3 years..I drained and flushed the fuel system and installed a new battery. I turned the switch on and checked that the lights, horn and turn signals all worked. I then cranked the bike and it ran well but I had no horn, high beam and tach but the turns worked. I checked the fuses and they were all good. I checked all the wiring for connections and all looked good. At times when I turn the switch on I will have the missing things working until I use one and it's like a fuse or breaker shuts everything down. Now I can't get it to run, it's not getting fuel, the plugs are dry.
This is my first modern goose and I'm lost..any suggestions for a new goose novice?
This is my first modern goose and I'm lost..any suggestions for a new goose novice?