I saw there was a recent post on the input seal hence my title.
Just replaced the large seal where the wheel bolts on. It started to drip and the oil got flung around the wheel rim and disk brake. Here in the UK I got one from Moto Mecca at about £45. Its easy to get out with a flat blade screwdriver as a lever. I drained the oil (not in that order though) and cleaned up before carefully drifting the new seal home.
My question is, do these go often or is mine a one off?. There is the slightest of movement in the bearing but not sure that is the cause. Slightest dont mean much so I will say normal movement!
Thanks
Nigel
Just replaced the large seal where the wheel bolts on. It started to drip and the oil got flung around the wheel rim and disk brake. Here in the UK I got one from Moto Mecca at about £45. Its easy to get out with a flat blade screwdriver as a lever. I drained the oil (not in that order though) and cleaned up before carefully drifting the new seal home.
My question is, do these go often or is mine a one off?. There is the slightest of movement in the bearing but not sure that is the cause. Slightest dont mean much so I will say normal movement!
Thanks
Nigel