In the course of trying to remove the forks on my Norge, I find myself stymied by an unexpected obstacle.
When it came time for the stanchions to "fall out" ... well, they didn't.
Tried gently prying the triple-tree "splits apart. Tried (again gently) tapping assembly with rubber hammer.
Nada.
Hmmmmmm.
Then looked up top.
Mine are 1200 Sport forks, and are different than stock Norge ones.
Anyone know if the answer is to remove that small PH screw at side, then back off that large (26mm?) top piece?
If so, will have to get the right-sized, thin-walled socket. I have nothing like that, as my sets are too small or too large. Need a Goldilocks sized one.
Grazie.
Bill
When it came time for the stanchions to "fall out" ... well, they didn't.
Tried gently prying the triple-tree "splits apart. Tried (again gently) tapping assembly with rubber hammer.
Nada.
Hmmmmmm.
Then looked up top.
Mine are 1200 Sport forks, and are different than stock Norge ones.
Anyone know if the answer is to remove that small PH screw at side, then back off that large (26mm?) top piece?
If so, will have to get the right-sized, thin-walled socket. I have nothing like that, as my sets are too small or too large. Need a Goldilocks sized one.
Grazie.
Bill