Tinkerfreak
Tuned and Synch'ed
I have my front end disassembled for suspension work and decided to take a look at the wheel bearings and found one to be slightly graunchy so I was going to pop them out and have a look to see if replacement is required but I have come across what appears to be some form of external seal retainer/housing and was wondering if the seal and bearing can be removed through this unit or do I have to remove it in order to remove the bearing and if so will the brake discs have to be removed in order to expedite the retainer removal. Any assistance with this will be greatly appreciated.
Cheers
Cheers