- Joined
- Apr 11, 2010
- Messages
- 18
I'm making a wiring harness from scratch for my Tonti project bike and have decided on using one of Rowe Electronics PDM-60 solid state power modules. Anyone tried or have opinions on these?
Never gotten this into electrical systems. Do I read my Carl Alliison wiring diagram correctly-ignition circuits have no circuit protection?
Any wiring design guidance offered will be greatly appreciated.
For those so inclined I believe I've found a great source for XLPE wire (not the PVC insulated stuff you get at the auto parts store) maneywire.com They have 22ga.-10ga TXL, GXL and SXL in 14 colors and they'll custom stripe your wire for you. 100' minimum per color and it comes on individual spools. Yea you'll have a lifetime supply of each size/color but if you geek-out on having the best supplies for your bike projects.......
Never gotten this into electrical systems. Do I read my Carl Alliison wiring diagram correctly-ignition circuits have no circuit protection?
Any wiring design guidance offered will be greatly appreciated.
For those so inclined I believe I've found a great source for XLPE wire (not the PVC insulated stuff you get at the auto parts store) maneywire.com They have 22ga.-10ga TXL, GXL and SXL in 14 colors and they'll custom stripe your wire for you. 100' minimum per color and it comes on individual spools. Yea you'll have a lifetime supply of each size/color but if you geek-out on having the best supplies for your bike projects.......