Ridemalibu Motorcycle Rentals & Tours – Los Angeles CA
  1. Ciao Guest - You’ve landed at the ultimate Guzzi site. In SoCal? See the Service tab above for the best in service, tires, tuning and installation of our products or custom work. NEW REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - AND PLEASE DON'T BE A DRIVE-BY POSTER: Most questions you may have are well answered on the Forum. As a common courtesy, check back if you are posting elsewhere on the web. There is zero tolerance on personal attacks and off-site links to other Forums or competing products. Note there's decades of Guzzi hands-on experienced help on this site, all whom give endless amounts of their time for free - be courteous. Also be sure to click on the Store link also above for our 600+ product inventory, including many of our 100% Made-in-house-USA GTM products and engine kits. We are still mostly a one man operation (not Amazon), so thanks in advance for your patience on orders. We do our best to get things out as quickly as possible, and we also aren't in control of things like customs & weather delays, etc. PLEASE refrain from emailing about your order Status, as you will get an email with tracking info when your order goes out; Email inquiries on orders slows everything down. Orders are currently being shipped once or twice a week. You can always sign into the online Store system to check the status. Please refrain if at all possible about emailing for an update; If you must ask for order info, please reply on the actual order email. You will get shipping info when it goes out via our online Store system (check your Spam folder), and if you want to cancel your order, please notify us direct email (do not post or use the Forum) and allow 7-10 business days for a reply BEFORE disputing the charge. We don't want your money if we can't deliver. Special order items are subject to a 15-20% cancellation fee. We cannot answer questions direct unless it’s about something on the Store or that you have purchased from us. We do NOT have a phone number - We are online only - Do not email and tell us to call you. You will find us highly responsive via email on the Contact page with any questions on our products (only). We appreciate the consideration, understanding and your business... past and future. Also be sure to see our GTMotoCycles.com custom BUILDS tab above.

Oil sump gasket material

Discussion in 'Small Block' started by guzzisti91, Dec 9, 2018.

  1. guzzisti91

    guzzisti91 Tuned and Synch'ed

    Joined:
    Feb 2, 2018
    Messages:
    79
    Likes Received:
    11
    Location:
    Villawood
    Hey fellows, stupid question here, i'm going to do a thorough service on me nevada - including cleaning the sump & secondary filter. I have both gasket cork & paper on the ready, will cork do? Or are there metal bits in the original gaskets? Thanks in advance
     
  2. john zibell

    john zibell Moderator Staff Member GT di Razza Pura

    Joined:
    Oct 28, 2008
    Messages:
    7,641
    Likes Received:
    674
    Location:
    Huntsville, AL
    Why not just buy the correct gaskets? If you won't then use paper. Cork wouldn't hold up.
     
  3. Dinsdale Piranha

    Dinsdale Piranha Cruisin' Guzzisti GT Contributor

    Joined:
    Jul 16, 2017
    Messages:
    360
    Likes Received:
    117
    Location:
    West Oz
    You can buy gasket paper if you're keen on making your own. I did for years, but I got older and more sensible :p. Gasket paper has a high lead content.
     
  4. guzzisti91

    guzzisti91 Tuned and Synch'ed

    Joined:
    Feb 2, 2018
    Messages:
    79
    Likes Received:
    11
    Location:
    Villawood
    Just recieved a factory gasket after the dealer told me it was some sort of rubber composite. It was, in fact, made of aluminium
     
  5. guzzisti91

    guzzisti91 Tuned and Synch'ed

    Joined:
    Feb 2, 2018
    Messages:
    79
    Likes Received:
    11
    Location:
    Villawood
    What annoys me is that nobody told me they're made of metal. I never replace metal bits with any other material
     

Share This Page