Finally sorted out the lead to connect with my TomTom Rider 2. I could see the TomTom connection under the side panel on the left but looked difficult to get to. In fact it is a 10 min job. To get the left hand side panel off remove 2 allen headed bolts: one under side panel at the side, one under headlight at front of panel. Remove nut under tank at rear of panel. With a bit of jiggling the panel then comes free at the front, remove indicator connector and you have access to the coiled up lead. Snip through the cable tie, route it to the bars then reassemble. The lead is plenty long. Have fun.