• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

trouble shooting '07 Norge heated grips

Captstevens

Captstevens

Just got it firing!
Joined
Sep 6, 2009
Messages
9
Location
Given. WV
I have an '07 Norge 1200 and the heated grips stopped working this last fall, anybody out there know what to check to trouble shoot them,??? The indicator in the dash shows that they are on LO-MED-HI but am not getting any voltage at the grips on the bars!!
 
The connectors to the heated grips themselves that are located under the tank appear to get corroded easily. Give them a good clean. You can check wire continuity to the grips and the condition of the heater itself by peeling back the grips slightly to reveal the wire terminals.
 
kiwi dave said:
The connectors to the heated grips themselves that are located under the tank appear to get corroded easily. Give them a good clean. You can check wire continuity to the grips and the condition of the heater itself by peeling back the grips slightly to reveal the wire terminals.
Click to expand...
The wires at the grips look good they are not corroded or broken.
 
What about the connectors under the tank? Have you checked those? Have you measured voltage at the grips? If so, is there a ground return? If not, the voltage will measure the same at both terminals.
 
Thanks Guys found the wires under the tank- un-plugged them, and squirted some electrical contact cleaner on them and they now work!! How ever my gear selector went south this summer, I think a spring broke inside! soooo I am going to attempt to pull the tranny and see if I can replace a spring inside or else take it to the Nearest Guzzi dealer to Charleston, WV which I am not yet sure where that is since Speakers Closed down a few years ago!!!
 
You must log in or register to reply here.
Back
Top