That is the issue the Samsung is not seeing the UpMap device, its saying its found the device but then freezes.
Sent email to you yesterday also Todd on this with a photo
Sent email to you yesterday also Todd on this with a photo
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Make sure you have good reception and dont stand too far away from the device. If I have crappy reception my applications spazzes out and says it doesn't recognise the VIN. What model Samsung do you have?Having this issue with mine, despite 8 attempts now , nothing, battery is fine, wifi good etc. just refuses to go past the 'founded device' screen then nothing happens , longest I left it was 30mins! then recharged bike battery. Anyone got any suggestions?
Samsung Model Galaxy A31Make sure you have good reception and dont stand too far away from the device. If I have crappy reception my applications spazzes out and says it doesn't recognise the VIN. What model Samsung do you have?
And what about the service icon. Can you reset it to with that platform?I was able to read and clear error codes on my V85TT.
The map I have says it's operation is disabled but do not disconnect themGood morning, a curiosity of mine guys but when remapping the ECU the lambda probes are kept active or deactivated
certainly, but can't you set the control unit to operate a little richer but controlled by the lambda probes?It would be a shame to keep working with the probes.
The slightly rich operation of these engines is so much more pleasant and especially at low revs, low opening.
Yep i get them when I get a crappy tank of fuel...Has anyone seen Upmap provide a code in the OBD Errors page? Or does this feature even work for the V7 Special 850?
I also have these faults, when the revs stagnate around 5000-6000 rpm on intermediate gears.Yep i get them when I get a crappy tank of fuel...
This website is run by me, who has lived in Guzzi-focused AFRs since 2001. No guessing needed.Who knows with what stoichiometric ratio it runs on the ranges after the remapping