• Ciao Guest - You’ve landed at the ultimate Guzzi site. NEW FORUM REGISTRATIONS REQUIRE EMAIL ACTIVATION - CHECK YOUR SPAM FOLDER - Use the CONTACT above if you need help. New to the forum? For all new members, we require ONE post in the Introductions section at the bottom, in order to post in most of the other sections. ALWAYS TRY A SEARCH BEFORE STARTING A NEW TOPIC - Most questions you may have, have likely been already answered. DON'T BE A DRIVE-BY POSTER: As a common courtesy, check back in and reply within 24 hours, or your post will be deleted. Note there's decades of heavily experienced Guzzi professionals on this site, all whom happily give endless amounts of their VALUABLE time for free; BE COURTEOUS AND RESPECTFUL!
  • There is ZERO tolerance on personal attacks and ANY HYPERLINKS to PRODUCT(S) or other competing website(s), including personal pages, social media or other Forums. This ALSO INCLUDES ECU DIAGnostic software, questions and mapping. We work very hard to offer commercially supported products and to keep info relevant here. First offense is a note, second is a warning, third time will get you banned from the site. We don't have the time to chase repeat (and ignorant) offenders. This is NOT a social media platform; It's an ad-free, privately funded website, in small help with user donations. Be sure to see the GTM STORE link above; ALL product purchases help support the site, or you can upgrade your Forum profile or DONATE via the link above.
  • Be sure to see the GTM STORE link also above for our 700+ product inventory, including OEM parts and many of our 100% Made-in-SoCal-USA GTM products and engine kits. In SoCal? Click the SERVICE tab above for the best in service, tires, tuning and installation of our products or custom work, and don't miss our GT MotoCycles® (not) art on the BUILDS tab above. WE'RE HERE ONLINE ONLY - NO PHONE CALLS MADE OR RECEIVED - DO NOT EMAIL AND ASK QUESTIONS OR ASK TO CALL YOU.
  • Like the new V100, GuzziTech is full throttle into the future! We're now running on an all-new server and we've updated our Forum software. The visual differences are obvious, but hopefully you'll notice the super-fast speed. If you notice any glitches or have any issues, please post on the Site Support section at the bottom. If you haven't yet, please upgrade your account which is covered in the Site Support section or via the DONATE tab above, which gives you full site access including the DOWNLOADS section. We really appreciate every $ and your support to keep this site ad-free. Create an account, sign in, upgrade your account, and enjoy. See you on the road in 2024.

V100 - Gas Mileage

191 (originally numbered 666) is a fantastic ride—I highly recommend it. The 1150 has the telelever suspension which I like. I thought the 1200’s were back to conventional telescoping forks, but that change must have been later.

Yes. My 1200RS had conventional forks. It is a great bike, just hard to turn at high speed. Oh, and very clunky shifting. The V100
is smooth and quiet compared to the boxer.😎
 
I'd probably have been a little more interested in the tpms light popping on in the middle of that run lol.
Maybe the centrifugal force had that effect at 125 mph, or the receiver couldn't keep up!
I'd probably have been a little more interested in the tpms light popping on in the middle of that run lol.

Yea. That front Telelever suspension is not the best thing in my opinion (more for comfort I think).
BTW, if you want very tight curves, the complete opposite of the Payson-Mesa road try the 191 from Alpine to Morenci. Less dicey riding up from Morenci). Good luck with your suspension Gerry.
A great ride! I also often ride 88 often, the short get it out of my system ride, since the mid to late 80s.
 
191 (originally numbered 666) is a fantastic ride—I highly recommend it. The 1150 has the telelever suspension which I like. I thought the 1200’s were back to conventional telescoping forks, but that change must have been later.
It is a great ride Gerry. I love to stay in Hannagan Meadow
 
😁

But seriously, the bike "hides" its speed very well. There are some long sweepers coming down from Payson to Mesa (probably well known to GmaninAZ) where I find myself going at over 100 mph (160 kph) without noticing. The R1200 RS was very twitchy in those curves and you really had to push the bike down hard to make them.
Yes, I do know that well; came back from Pine Labor Day weekend and was cruising the big sweepers 90-95+ to get away from and in front of traffic, and touched on 122 or so further down the hill. The V100 does need a firm hand, just like most at elevated speeds, but it excells at 6-7 tenths and turns in a little easier, but it was not meant to be a Super Sport, but fits perfectly into the Sport Touring slot.
Also love Yarnell, White Spars, the canyon from Prescott Valley to Jerome, and back, and Salt River Canyon. Also 88 to Tortilla Flat and beyond to where the road turns to dirt, and then back down, has the tight curves someone may be wanting and close to home but need to go early in the morning................ If you're not familiar give me a shout and we and GerryAZ can go sometime. I am heading to Asheville NC in Oct to visit a buddy from hometown/school and we will get to Deal's Gap, Maggie Valley, Blue ridge Parkway and many other great roads.
 
  • Like
Reactions: BDS
I love the fact that in Fahrenheit, the only show 2 digits "02" instead of "102"

I just noticed this on my bike in ride here in California today....
I don't like when in the garage it reads 14 or 15, that means I'm staying off the bike.......
 
Yea, I am not sure if it is an advantage or disadvantage, but the V85TT dash shows all 3 digits. I am up for a ride when the weather cools a bit.

The dealer in Queen Creek has a V100 demo. I was there Saturday (drove air conditioned electric car) to pick up an MIA unit for the V85TT—they encouraged me to bring my helmet next time and take a test ride. I am afraid to take a test ride because I don’t have extra space in my garage!
 
Last edited:
Yes, I do know that well; came back from Pine Labor Day weekend and was cruising the big sweepers 90-95+ to get away from and in front of traffic, and touched on 122 or so further down the hill. The V100 does need a firm hand, just like most at elevated speeds, but it excells at 6-7 tenths and turns in a little easier, but it was not meant to be a Super Sport, but fits perfectly into the Sport Touring slot.
Also love Yarnell, White Spars, the canyon from Prescott Valley to Jerome, and back, and Salt River Canyon. Also 88 to Tortilla Flat and beyond to where the road turns to dirt, and then back down, has the tight curves someone may be wanting and close to home but need to go early in the morning................ If you're not familiar give me a shout and we and GerryAZ can go sometime. I am heading to Asheville NC in Oct to visit a buddy from hometown/school and we will get to Deal's Gap, Maggie Valley, Blue ridge Parkway and many other great roads.

👍

PS. Wife loves Jerome/89A
 
I'm glad I'm not the only one who noticed the speedometer was a little wonky at higher speeds. Mine seems to read a bit high once you get over 65mph.
 
I'm glad I'm not the only one who noticed the speedometer was a little wonky at higher speeds. Mine seems to read a bit high once you get over 65mph.

I think they have to read 5 to 10% higher than actual speed by law in Europe. Is this true European members?
 
Not sure about the rest of Europe but in the UK they must not read slower than your actual speed and no more than 10% over.
 
There are definitely regulations for this in EU.
Don’t know the details though.
But either you can mathematically calculate the speed per 1000 revs/min if you can find the gear ratio in some tech spec, or use a gps to compare.
I posted a video earlier with someone testing the top speed, and he was just into the red area when showing around 245-247km/h.
If I’m not mistaken the theoretical top speed is around 240km/h.
so that would give about 5km/h deviation.
Quite OK I would say.
However that is this individual V100, and we don’t know the tolerance in general here.
But we shouldn’t expect much difference between individual bikes.
 
I haven’t found the gear ratio yet.
16mph/1000rpm?
Dunno, a converter said 231,7km/h for 144mph.
That could be right for 9000rpm, and still not exclude the correctness of reached 247km/h on the dash if kept to rev limiter at 9500rpm(?).
9500rpm would equal 152mph, or 245km/h actual speed, if 1000rpm = 16mph.
All academic discussion, but just fun facts compared to main stream competitors like Yama Tracer 9 and similar.

Btw:
1694725156838
 
Gear ratio's are primary drive:1.548, 6th gear:0.96 and final drive:3.166 giving an overall ratio of 4.70.
 
Back
Top