Hi All,
I've found out that the thread on one of the valve adjuster screws is pretty damaged from previous adjustments and wanted to buy new one.
Now I see there are two part numbers for this part (873850-OLD and 879707-NEW).
The first one is nowhere to be found (dealer can't order it, couple of online shops say part no longer available), and the second (NEW PN) looks different than the one I have (the first one - for 2010 Sport1200)
So this is the OLD - which I have on both Cylinders (873850)
http://www.stein-dinse.biz/images/product_images/popup_images/873850.jpg
And this is the new, Part Number (879707):
http://www.stein-dinse.biz/images/product_images/info_images/879707.jpg
So my question is, are they compatible? Because at least from the pictures found online they don't look quite the same and I am worried that if I buy the new version I might not be able to fit it (The thread difference, length..and anything else maybe....)
Has anyone replaced just this screw with the new PN screw and fitted successfully without having to replace anything else ?
I've found out that the thread on one of the valve adjuster screws is pretty damaged from previous adjustments and wanted to buy new one.
Now I see there are two part numbers for this part (873850-OLD and 879707-NEW).
The first one is nowhere to be found (dealer can't order it, couple of online shops say part no longer available), and the second (NEW PN) looks different than the one I have (the first one - for 2010 Sport1200)
So this is the OLD - which I have on both Cylinders (873850)
http://www.stein-dinse.biz/images/product_images/popup_images/873850.jpg
And this is the new, Part Number (879707):
http://www.stein-dinse.biz/images/product_images/info_images/879707.jpg
So my question is, are they compatible? Because at least from the pictures found online they don't look quite the same and I am worried that if I buy the new version I might not be able to fit it (The thread difference, length..and anything else maybe....)
Has anyone replaced just this screw with the new PN screw and fitted successfully without having to replace anything else ?