Hi everyone,
I changed the engine oil 7 days ago once I reached the end of the running-in period. I've been checking the level at least twice a day since then. Everything seems to have been ok. No leaks, warning lights, or other warnings. Today I rode the bike for 15Km before my first stop at the dealership.
Once I turned it back on after 20 minutes of rest and started to roll in first gear the engine died on me. I tried to re-start the bike to no avail. So far the mechanic and I found the following:
1. The ignition sequence seems normal (e.g. all lights briefly turning on and then off again).
2. The red warning light for the oil pressure does not stay on.
3. The only visible warning on the LCD is the wrench reminder (I did not reset it after the oil change).
4. Error codes DSB 07 and DSB 08 are being reported by the console.
5. The spark plugs work fine.
6. Forcing combustible mixture via the intake makes the engine run ok unti it starves.
From previous posts I understand that some of you have experienced faulty oil sensors. I know this may be the case for my bike but what I find frightening is that the engine won't turn. Any suggestions?
Thanks all
ipo
I changed the engine oil 7 days ago once I reached the end of the running-in period. I've been checking the level at least twice a day since then. Everything seems to have been ok. No leaks, warning lights, or other warnings. Today I rode the bike for 15Km before my first stop at the dealership.
Once I turned it back on after 20 minutes of rest and started to roll in first gear the engine died on me. I tried to re-start the bike to no avail. So far the mechanic and I found the following:
1. The ignition sequence seems normal (e.g. all lights briefly turning on and then off again).
2. The red warning light for the oil pressure does not stay on.
3. The only visible warning on the LCD is the wrench reminder (I did not reset it after the oil change).
4. Error codes DSB 07 and DSB 08 are being reported by the console.
5. The spark plugs work fine.
6. Forcing combustible mixture via the intake makes the engine run ok unti it starves.
From previous posts I understand that some of you have experienced faulty oil sensors. I know this may be the case for my bike but what I find frightening is that the engine won't turn. Any suggestions?
Thanks all
ipo