DronkBergie
Tuned and Synch'ed
Cool, also thought it was flooding but wont my plug be wet if it was flooding? Can you or someone possibly give me some guidance to reseting the carbs example turning in all mixture screws and turning them out a certain amount etc..? What is the baseline to start with these carbs? And float heights please? Also where should i start with needle positions?Looks like you are flooding out the right side. Check that needles, atomizers, jets, and float levels are the same in both carbs. Also possible you have an air passage blocked on the right side. Once both are the same and all passages are clear try a new plug and see what happens.