For those of you with OEM bags, the other night I noticed that the front verticle edge where the silver insert meets the black main body of the bag, had a gap approx. 1/32" at the front verticle seam, that showed two alignment pins and just didn't look right. I've had the bike since late May and didn't notice this before, but maybe the light or angle was different, but I noticed and it. I removed the silver accent panel and found on both L&R sides a small nylon washer in only the front screw recess, the same thickness of the gap. I removed the nylon washers, re-assembled, and no more gap. I see no reason for the washers, as there is still a very small gap that looks correct, and the silver panel now has an even recess to the black main body where before the silver panel stuck out in the front along the horizontal seam........